Tempco HDC17058 Cartridge Heater 0.625" × 52" 2700W 230V, 16" Leads

Item Specifics

• Brand: Tempco

• Model / Part Number: HDC17058

• Type: High‑density cartridge heater (general‑purpose HTC‑style element)

• Sheath Diameter: 0.625 in (5/8 in)

• Overall Length: 52 in (52‑13/16 in full length)

• Heating Area / Immersion Length: 51‑13/16 in (≈51.81 in)

• Wattage: 2700 W

• Voltage: 230 V AC

• Lead Length: 16 in leads (terminated through 16 in)

• Lead Style: 52 in total “LDS16” style leads, with 16 in being the usable / routed‑length portion

• Sheath Material: 321 stainless steel (typical Tempco hi‑density cartridge heater)

• Application:

  • Cartridge‑type insertion into drilled holes in metal platens, molds, or other heated blocks

  • Industrial heated surfaces, tooling, and process equipment where 0.625" diameter, ~52" length is required

• Condition: New

Condition Description
Item is brand‑new and has never been energized. The 0.625" stainless‑steel sheath shows no scaling, discoloration, or dents. The 52‑13/16" overall length and 51‑13/16" heating area are undamaged, and the 16‑inch leads are full length with clean, unstripped insulation and no prior terminations. The label and HDC17058‑type marking are legible. Packaging may be opened or lightly shelf‑worn, but the heater itself is unused.

Description
This listing is for one Tempco HDC17058 high‑density cartridge heater rated 2700 W at 230 V, with a 0.625" diameter and 52‑13/16" overall length, including 16" leads (LDS16 configuration). The effective heating area is 51‑13/16" (about 51.81 in), leaving a short non‑heated tip for sealing and mounting.

This heater is designed to be pressed or inserted into a matching 0.625" diameter hole in a platen, die, or other metal block, providing uniform conductive heating over its long element area. Typical 321 stainless‑sheath construction supports high watt density and good thermal performance in industrial tooling and process‑heating applications when operating within Tempco‑recommended watt‑density and temperature limits.

The 16" leads allow enough length for routing to a junction box or control panel, while the 52‑inch overall size suits large‑area heated surfaces that require extended, low‑stress‑gradient heating.

Search‑Optimized Highlights

• Tempco HDC17058 cartridge heater, 2700 W 230 V

• 0.625" diameter, 52‑13/16" overall, 51‑13/16" heating area

• 16 in leads (LDS16‑style), 321 stainless sheath

• Hi‑density industrial cartridge heater for platens & molds

• New 0.625" × 52" Tempco cartridge heater

Included

• 1 × Tempco HDC17058 high‑density cartridge heater with 16" leads

No mounting hardware, wiring accessories, or gaskets are included unless shown in photos.

Shipping & Handling

• Ships from Los Angeles, California, USA

• Handling time: 1 business day after cleared payment

• Domestic shipping: UPS Ground by default (message before purchase if you need expedited or alternate service)

• International shipping: Available to eligible countries through eBay’s international shipping options

Returns

• No returns accepted

• All sales are final; please confirm HDC17058 dimensions (0.625" dia, 52‑13/16" overall, 51‑13/16" heating area, 16" leads), 2700 W / 230 V rating, and suitability for your hole size, watt‑density, and maximum sheath temperature before purchase.