2 Sets 11.8" Long Propane Push Button Piezo Igniter Kit Gas

To avoid placing the wrong order: Please confirm that the product size is what you want before placing an order. Thank you     Description: DIY kit suitable for all Propane & Natural Gas Gears but you may need do some modification during installation, It not fits all the current hole for install or the length of wire (if power is not enough you can use two） No battery needed just press, one press one spark but make sure you connect the ground wire or touch frounding points.       Specification: Output voltage: >=20kv, Sparking distance: 3-5mm, wire length 30cm, Electrode : M10*1 length: 57mm Life time: Over 30000times Pin straight length: 19.5mm 135degree at head 9.0mm Wire resistance 392℉.       Package included: 2 Set Push Button Piezo Igniter Kit        Installtion Tips: VERY IMPORTANT!!! the piezo igniter has a silver single line which act as ground connection potint. you must tough that point to a metal control pannel or add some metal to get a singnal there so you can get it correct spark. Without Connect well, The igniter cannot ignite the burner because the spark will not come from the head of electrode pin If the kit cannot ignite the burner, please check if the body are insolated and make sure the grouding point on igniter are well connected with your metal sheet grill body. ( it cannot connect the insolated subject but need connect something conductive.       Note: Please allow 0.5-1cm differences due to manual measurement. Due to the light and screen difference, the item's color may be slightly different from the pictures.  

On Mar 16, 2026 at 00:03:59 PDT, seller added the following information: